Abstract
Jun 16, 04:16 AM
I'd love to have a place for flamewars as well. Some place to vent, call each other names, and just bash everyone and everything you think is dumb, or extremely frustrating.
whats your problem :eek: you know some people dont want to die alround here or have there house burned down :p
*grabs for his pitchfork and torch*
whats your problem :eek: you know some people dont want to die alround here or have there house burned down :p
*grabs for his pitchfork and torch*
dylangurl21
Mar 1, 03:58 PM
Just wondering if this shipped?
Bob_Barker
Oct 2, 12:16 PM
I'm not sure. Probably more than $345. I'm leaning more towards a trade for a touch.
TomH TX
Apr 9, 12:14 PM
Try going into parallels settings and increasing the ram allocated to the virtual machine to at least 3gigs. That is what I had to do. Hope that helps. :)
more...
wolrabn
May 4, 02:24 PM
still not given up.. though its fading.
i've now tried custom firmware making sure im in pwned dfu mode for 2.2.1 and 3.1.3 using both pwnagetool and sn0wbreeze.
all return error 6.
tried using itunes 7.7 on windows but that cannot connect to software update server...
im pretty certain its not on ipad baseband now. i've added the ecid to tinyumberella but it doesn't see it and 'fix recovery' option fails.
also tried using ireb then sn0wbreeze custom firmware- no joy.
tried pretty much all official firmware.
has anyone seen this sort of error before and it be hardware related?
i've now tried custom firmware making sure im in pwned dfu mode for 2.2.1 and 3.1.3 using both pwnagetool and sn0wbreeze.
all return error 6.
tried using itunes 7.7 on windows but that cannot connect to software update server...
im pretty certain its not on ipad baseband now. i've added the ecid to tinyumberella but it doesn't see it and 'fix recovery' option fails.
also tried using ireb then sn0wbreeze custom firmware- no joy.
tried pretty much all official firmware.
has anyone seen this sort of error before and it be hardware related?
homerjward
Oct 16, 06:11 PM
couldn't you just keep your pc for the pc-only app(s) you have?
more...
TheWheelMan
Apr 4, 09:17 PM
I think I made an error yesterday by trying to charge the iPad with a 3rd party connector. It charged fine, and this morning I awoke to a 100% charged battery as usual.
Out of curiosity, why did you use a third party charger? I've done it a few times with other devices, but it's always been with quality, branded chargers (like charging my Kindle with my BlackBerry's charger), but I wouldn't dare do that with my iPad unless I knew it was top quality since so many of those third party chargers, like third party batteries, can damage your equipment.
By the way, I think using a third party charger may have voided your warranty anyway. At least on some devices I'm pretty sure it does.
Out of curiosity, why did you use a third party charger? I've done it a few times with other devices, but it's always been with quality, branded chargers (like charging my Kindle with my BlackBerry's charger), but I wouldn't dare do that with my iPad unless I knew it was top quality since so many of those third party chargers, like third party batteries, can damage your equipment.
By the way, I think using a third party charger may have voided your warranty anyway. At least on some devices I'm pretty sure it does.
PalmHarborTchr
Jan 3, 03:15 PM
I read that piece but it did not solve
my problem.
The file plays fine in iTunes but it
will not burn.....I click on burn.....I get
the "checking media" message then
I get "none of the items in this playlist can be burned to disc" and that ends
it. when I used a different software
to burn the result I got was 99% hiss
on the finished CD, I used 'dragon burn"
Anyone got some answers?????
my problem.
The file plays fine in iTunes but it
will not burn.....I click on burn.....I get
the "checking media" message then
I get "none of the items in this playlist can be burned to disc" and that ends
it. when I used a different software
to burn the result I got was 99% hiss
on the finished CD, I used 'dragon burn"
Anyone got some answers?????
more...
WillEH
Apr 27, 09:05 PM
Yes, any Apple Authorized Service Center will honor the AppleCare. I have worked for two so far, and generally I would recommend them over the Apple Stores for most situations.
Note that he didn't say reseller. That would be a different story.
jW
No wonder my answer was c*ap, I was answering a different question to what he was asking! Us British are useless! Thanks bud :)
Note that he didn't say reseller. That would be a different story.
jW
No wonder my answer was c*ap, I was answering a different question to what he was asking! Us British are useless! Thanks bud :)
mgartner0622
Apr 8, 08:28 PM
I wouldn't think so because he accepted the terms of the deal when he bid. It's a legal contract, but call eBay to find out for sure.
Ok, will do!
Thank you very much for the information and input everyone!
Ok, will do!
Thank you very much for the information and input everyone!
more...
drew.bowser
Feb 18, 10:59 AM
I have not done an SSD per say, but I have made a little side business upgrading the hard drive on 2010 Mac Mini's and selling them on ebay. After having done 10 or so of these, yes you do need to pull the logic board out slightly. The hard drive will not lift up enough to give you the angle you need clear the logic board with out pulling it out.
That said, only pull it out enough to see a small gap of air between the black beisl in the rear and the alum case.
WRT the heat sensors... I have found that the smallest amount of rubber cement works well if you you loose the adhesive when transferring the sensor. 8/10 times you will have plenty of stick left though and wont need to add any.
The black cover I have also assumed was there for air flow as well. If the SSD has a smooth surface, and not logic board to short, you probably can do away with it.
I will say that the OWC video is dead on. Follow it precisely. PAY ATTENTION TO THE SENSORS ON THE HDD. THEY BREAK VERY EASILY!!
I found that out the hard way. I have a new sensor on the way as we speak.
I second everything tek is saying. He's a smart guy :)
TEK - QUESTION - the glue...you can use standard rubber cement? It doesnt have to be a special kind of thermal glue or anything??
That said, only pull it out enough to see a small gap of air between the black beisl in the rear and the alum case.
WRT the heat sensors... I have found that the smallest amount of rubber cement works well if you you loose the adhesive when transferring the sensor. 8/10 times you will have plenty of stick left though and wont need to add any.
The black cover I have also assumed was there for air flow as well. If the SSD has a smooth surface, and not logic board to short, you probably can do away with it.
I will say that the OWC video is dead on. Follow it precisely. PAY ATTENTION TO THE SENSORS ON THE HDD. THEY BREAK VERY EASILY!!
I found that out the hard way. I have a new sensor on the way as we speak.
I second everything tek is saying. He's a smart guy :)
TEK - QUESTION - the glue...you can use standard rubber cement? It doesnt have to be a special kind of thermal glue or anything??
Broc27
Apr 26, 05:39 PM
Unfortunately it isn't since they aren't using the same chipset.
You could, however, upgrade the 8-core base model to a 12-core or upgrade the quad core base model to a single 6-core.
You could, however, upgrade the 8-core base model to a 12-core or upgrade the quad core base model to a single 6-core.
more...
wchong
Jun 10, 09:22 AM
could anyone explain why there were two bridges?
87racer
May 2, 02:21 PM
Would moving the Finder preference file to your Desktop and starting help? If it's a Finder issue perhaps forcing Finder defaults may help?
Quick question, how did you install Lion? I'm asking as some people installed it over Snow Leopard and are running into issues. You can install it fresh by burning the dmg in Lion(DP1 or 2, doesn't matter but DP2 will be best)/Contents/SharedSupport/InstallESD.dmg to DVD or USB:
Creating a bootable OS X 10.7 Lion disc (Update: …and USB stick) (http://holgr.com/blog/2011/02/creating-a-bootable-os-x-10-7-lion-disc/)
I booted up with a fresh SSD and installed fresh, and it fixed a lot of issues (such as not being able to delete any app's in Launchpad and some app's that were not working in DP2 update 2 work well).
Hope this helps! I'm gonna post a thread with this info as well in case others want to know. :)
I deleted it then killed finder in act mon then emptied my trash and restarted. still not enabled.
One of my machines is a macbook air installed from snow leopard to an empty partition.
My other machine is a hackintosh installed using the method you described with nothing migrated from any previous installation. I doesn't work on either of them.
Quick question, how did you install Lion? I'm asking as some people installed it over Snow Leopard and are running into issues. You can install it fresh by burning the dmg in Lion(DP1 or 2, doesn't matter but DP2 will be best)/Contents/SharedSupport/InstallESD.dmg to DVD or USB:
Creating a bootable OS X 10.7 Lion disc (Update: …and USB stick) (http://holgr.com/blog/2011/02/creating-a-bootable-os-x-10-7-lion-disc/)
I booted up with a fresh SSD and installed fresh, and it fixed a lot of issues (such as not being able to delete any app's in Launchpad and some app's that were not working in DP2 update 2 work well).
Hope this helps! I'm gonna post a thread with this info as well in case others want to know. :)
I deleted it then killed finder in act mon then emptied my trash and restarted. still not enabled.
One of my machines is a macbook air installed from snow leopard to an empty partition.
My other machine is a hackintosh installed using the method you described with nothing migrated from any previous installation. I doesn't work on either of them.
more...
germanjulian
Jun 15, 05:32 AM
Hi,
anyone coming down? Who wants to meet up at 7am (or earlier?).
I shall bring cookies for everyone, mcdonalds for myself and some water (trying not to drink to much :D)
anyone coming down? Who wants to meet up at 7am (or earlier?).
I shall bring cookies for everyone, mcdonalds for myself and some water (trying not to drink to much :D)
shttngdcknps
Feb 4, 10:17 AM
While i dont have an answer for you, i just got a switcheasy Rebel Touch and it comes with its own universal dock connecter designed for the case and it fits perfectly
more...
Consultant
Apr 11, 01:00 AM
hth :cool:
That's a great one! LOL.
That's a great one! LOL.
johnnyturbouk
Apr 9, 08:29 AM
how small do your fingers need to be to use the mute switch?!? "THAT'S" why i dont like bumpers and cases.
ive got tiny hands.. so yay.. for me lol
i quite like this case, i like the mettalic blue one in particular
ive got tiny hands.. so yay.. for me lol
i quite like this case, i like the mettalic blue one in particular
mrsir2009
Apr 6, 11:12 PM
Erase and Install.
Lesson: Don't install preview/beta OS over your original OS when you are relying on that machine.
+1. I'm going to wait till Lion has been out for 2-3 months and all the 3rd party software I use is compatible with it :D
Lesson: Don't install preview/beta OS over your original OS when you are relying on that machine.
+1. I'm going to wait till Lion has been out for 2-3 months and all the 3rd party software I use is compatible with it :D
pcypert
Mar 20, 06:51 AM
I haven't seen anything mentioned here as a decent game that's not also available in Japan. All they sell here are the Jap imports and they have all the "names" mentioned here...plus the Pokemon game everyone's on "pins and needles" for :p
Paul
Paul
iPhonePhan
Jun 20, 05:44 PM
Work and the World Cup will keep me pretty well occupied until Thursday. And this site of course.
World Cup and work for me. BRRRRRAAASSSIL!! PENTACAMPE�ES ! E DENTRO DE POUCO HEXACAMPE�ES!
Sorry in advance to the non-Brazilians (and after today's awesome game, Cote d'Ivoiriens ;)
World Cup and work for me. BRRRRRAAASSSIL!! PENTACAMPE�ES ! E DENTRO DE POUCO HEXACAMPE�ES!
Sorry in advance to the non-Brazilians (and after today's awesome game, Cote d'Ivoiriens ;)
Pete_Hoover
Jul 1, 09:50 AM
Originally posted by mnkeybsness
for ichat AV you need a firewire camera. it will not work with any usb or usb2 cameras.
That stinks. They shuould make it capable to do video with USB cams. They are cheaper. The quality is not as good, but they are cheaper.
for ichat AV you need a firewire camera. it will not work with any usb or usb2 cameras.
That stinks. They shuould make it capable to do video with USB cams. They are cheaper. The quality is not as good, but they are cheaper.
rgarjr
May 5, 02:35 PM
yeah dude, iphones are locked to ATT or Verizon. U can get a factory unlocked but they are expensive. Gevey SIM is your best bet if you wanna unlock an iP4.
U can probably get a plan from T-mo for 500 min voice/200MB data for like 45 bucks. For texting u can use Google voice app.
U can probably get a plan from T-mo for 500 min voice/200MB data for like 45 bucks. For texting u can use Google voice app.
-DH
Mar 30, 04:36 PM
There are several camera stabilizers on the market, plus, there are shoulder mounts and monopods available as well.
-DH
-DH
No comments:
Post a Comment